Magazine with articles and news publications about enameling
Author: WebMaster/Sunday, June 1, 2008/Categories: Hot Enamel A,B,C.
The purpose to use glue with enameling is to glue the enamel powder and cloisonne wire to the surface of the art piece. As long as everything is flat then there will be no problems, however, when there are vertical surfaces or slope surfaces, then it is required to use glue Below you can read how and when to use glue..
Apply glue with a brush
In stead of demineralized water, you can use the glue, to make a paste for wet pack.
Apply the glue on with a brush on the slope or vertical surface. Sift the enamel powder on the surface. You have to act swiftly, before the glue dries out. Let it dry.
Separate materials like cloisonne wire, glass threads, granules etc, can be secured by applying glue to the object and to let it dry.
Sprinkle powder
There is special glue available to glue cloisonne wire onto vertical and slope surfaces.
Bevels
Number of views (75504)/Comments (0)
Webmaster of the watermanshop enamel supplies webshop